The Developer Or Fixer Level Is Too Low - AGFA Classic E.O.S. Reference Manual

The developer or fixer level is too low

The following message indicates that the level of the developer in the processor
tank is too low:
'HYHORSHU
OHYHO ORZ
You will have to check and possibly refill the respective tank with developer or
fixer.
It is recommended to check, and, if necessary, refill fixer first and developer
afterwards. You can thus avoid spilling fixer in a full developer tank, which
would necessitate draining and cleaning the developer tank.
Possible causes are:
• The drain valve of the respective tank is not shut properly.
• A replenishment failure, e.g. the replenishment tanks could be empty.
To check the developer or fixer level:
1
Remove the top cover.
2
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
1280C GB 20001204
or, for the fixer,
√
1
)L[HU
OHYHO ORZ
√
79