Media Housing; Sensor - SATO Argox D2-250 User Manual

5 Maintenance
Note Printhead warranty becomes void if printhead serial number is
removed, altered, defected, or made illegible, under every circumstance.

5.1.2 Media housing

Use a soft cloth to clean the dust, dirt or debris built up on the Media Roll
Holders, Media Guides and media path.
1. Moisten a soft cloth with ethyl alcohol.
2. Wipe the Media Roll Holders to clean dust.
3. Wipe the Media Guides to clean dust and dirt.
4. Wipe the media path to clean paper debris.

5.1.3 Sensor

Media sensors may not be able to detect the media correctly if it becomes
dirty.
1. Moisten a soft cloth or a cotton swab with absolute ethyl alcohol.
2. Gently brush sensors to remove the dust away.
3. Use a dry cloth to clean the residue.
52