SATO Argox D2-250 User Manual page 35

3 Printer operation Self Test
When it is enabled, the host communicates with the printer via the socket.
Socket Port
Display printer port number.
IPv6 Mode
It determines how you get the IPv6 address of your printer. There are three
modes: MANUAL, DHCPv6 or AUTO.
IPv6 Type
It is the IPv6 address type of your printer. There are four types: NONE,
NORMAL, EUI and ANY.
IPv6 Address
Display printer current IPv6 address.
Link Local
The IPv6 address that used in a network segment. It is allocated
automatically.
If your printer has a Wi-Fi module, your PPLZ configuration label will contain
the following entries:
FW Version
Display WLAN board firmware version.
Date
Display WLAN board firmware version date.
IP Address
Display the IP address of your printer. When DHCP is enabled, it shows the
automatically assigned IP address; when DHCP is disabled, it shows the
manually specified IP address.
Subnet mask
Display the current IPv4 subnet mask of your printer in Wi-Fi module.
Gateway
Display the gateway of your printer. When DHCP is enabled, it shows the
automatically assigned gateway; when DHCP is disabled, it shows the
manually specified gateway.
Mac address
The unique address assigned to your printer that connects to the internet.
29