Turn On/Off Your Printer; Turn On Your Printer; Turn Off Your Printer - SATO Argox D2-250 User Manual

2 Get started

2.2 Turn on/off your printer

When your printer is connected to a host (a computer), it is good to turn on
the printer before turning on the host, and turn off the host before turning
off the printer.

2.2.1 Turn on your printer

1. To turn on your printer, turn on the Power Switch as below. The "I" is the
ON position.
2. Both status lights glow solid Amber for a few seconds, then turns to solid
green.
Note If you connect the printer to the internet or insert a USB drive
before turning on the printer, it will take longer for the printer to enter
the online mode after you turn it on.

2.2.2 Turn off your printer

1. Make sure LED is solid green before turning off the printer.
2. To turn off your printer, turn off the Power Switch as below. The "O" is
the OFF position.
Caution Do not turn off your printer during data transmission.
11
Turn on/off your printer