Ringer Tone - Panasonic KX-TG2720S Operating Instructions Manual

Ringer Tone

You can select one of 6 ringer tones for each line from your handset or from
your base unit individually. When a call is being received on the line, the
handset and base unit ring in the selected tone.
LINE 1 is preset to "1". LINE 2 is preset to "2".
Handset
Make sure the handset is not being used.
Press
1
(CONF/FUNCTION)
"Ringer setting" by pressing
and press
á
2 Scroll to "Ringer tone" by pressing
, and press
Ñ
3 Press (Line 1) or
Ö
the line.
•The line's current setting will be displayed.
Select the desired ringer tone by pressing
4
or .
Ö Ñ
•Each time you press Ö or Ñ, the tone will
change and ring. If the ringer volume has been set
to OFF for the line, the handset will not ring (p. 21).
•You can also select the ringer tone by pressing dialing buttons (1)
Press the right soft key (
5
•A beep sounds.
•To program the other line, start again from step 2.
•To exit the programming mode, press (OFF).
Base unit
Make sure the base unit is not being used.
For line 1 ringer tone, press
1
For line 2 ringer tone, press
•The base unit rings at the current setting.
2 Within 5 seconds, select the desired ringer tone by pressing
.
Ü
•Each time you press á or Ü, the ringer tone will change and ring.
•You can also select the ringer tone by pressing dialing buttons (1) to (6)
•You cannot change the ringer tone for internal calls.
For assistance, please call: 1-800-211-PANA(7262)
, and scroll to
.
.
á
(Line 2) to select
Ñ
SAVE
(RINGER!L1)
(RINGER!L2)
H
or ,
Ö Ñ
or
Ö
H
Ringer tone
G
Ringer tone
Line2
GF
).
.
.
Save directory
Ringer setting
Copy directory
Ringer volume
Ringer tone
Incoming call
F
=Line1 =Line2
S A V E
LINE1 LINE2
to
(6).
or
á
.
:2
65