Panasonic KX-TG2720S Operating Instructions Manual page 27

To redial the last number dialed on the handset
Press or
•You can select a line by pressing the left soft key (
( ), instead of pressing
LINE2
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial
list.
1. Press
(PAUSE/REDIAL)
•The last number dialed is displayed with
number 1.
2. Scroll to the desired number by pressing
or .
Ö Ñ
•You can also scroll down through the list by pressing (PAUSE/REDIAL).
•To exit the list, press (OFF).
3. Press or
•You can select a line by pressing the left soft key (
key ( ), instead of pressing
LINE2
•To erase an item, repeat steps 1 and 2, and press (HOLD/CLEAR).
•If "No items stored" is displayed, the list is empty.
To put a call on hold
Press
(HOLD/CLEAR)
•"Hold" and the line are displayed. The line status icon
and " " or "
LINE1
•To transfer the call to the base unit or another
handset (if the system has one or more additional
handsets, p. 23), see page 51.
•If a call is kept holding for 6 minutes, an alarm tone will start to sound.
After 4 additional minutes on hold the call will be disconnected.
To release the hold
From the handset, press the left soft key (
( ) for the line.
LINE2
From the base unit, press the line button.
•If another phone is connected on the same line (p. 70), you can also release the
hold by lifting its handset.
•If the system has one or more additional handsets (p. 23), another handset user
can also release the hold by pressing the left soft key (
key ( ) for the line.
LINE2
For assistance, please call: 1-800-211-PANA(7262)
, and press
(PAUSE/REDIAL)
.
.
.
twice.
" flash.
LINE2
.
) or the middle soft key
LINE1
333-4444
GF
--Redial list1--
LINE1
.
Ex. Line 1 on hold.
L1
LINE1 LINE2
) or the middle soft key
LINE1
LINE1
) or the middle soft
[
SP PRIVACY 1
Hold Line1
) or the middle soft
]
27