2-Way Radio Communication (When The System Has Additional Handsets) - Panasonic KX-TG2720S Operating Instructions Manual

2-Way Radio Communication
the System Has Additional Handsets)
If you purchase one or more additional handsets (p. 23), you can use this
feature (except for KX-TGA272S). A handset user can talk with another
handset user regardless of the base unit location. 2-Way Radio
communication, which is the direct communication between a pair of
handsets, does not need the base unit interface.
You need to turn the mode on on the handsets.
Once the mode is on, the handset can be used only to talk with another
handset, and the following features cannot be used on the handset:
– Making/answering external and internal calls
– Searching the Caller List or directory
– Programming
– Receiving Caller ID information
After finish using this mode, remember to turn the mode off. Otherwise
the battery operating time will be shortened (p. 15).
To turn the 2-Way Radio mode on
Make sure the handset is not being used.
1 Press
(CONF/FUNCTION)
2 Scroll to "
or
Ö Ñ
Press
3
á
Select "On" by pressing
4
Press the right soft key (
5
•A beep sounds and the mode will turn on.
•You can exit the programming mode any time by pressing (OFF)
To turn the mode off:
Place the handset on the base unit or the charger.
•You can also turn the mode off by performing the three procedures: (1) press
(CONF/FUNCTION), (2) select "Off" by pressing Ö or Ñ, and (3) press the
right soft key (
•"2Way radio mode" will disappear and the mode will turn off.
58
.
2Way radio mode
.
.
Ö
).
SAVE
" by pressing
or .
Ñ
).
SAVE
(When
Initial setting
H
2Way radio mode
---------------
2Way radio mode
:Off
GF
LINE1 LINE2 S A V E
2Way radio mode
:On
GF
LINE1 LINE2 S A V E
2Way radio mode
.