Panasonic KX-TG2720S Operating Instructions Manual page 52

Transferring a Call
To transfer a call from the base unit
1 During a call, press
•The call is put on hold and the LINE indicator flashes.
To page the handset, enter the extension number using the dialing
2
button (
(1)
To page all handsets (when the system has additional handsets, p. 23),
press
(0)
3 If required, wait for the handset user to answer, and you can
announce the transfer. If not required, go to step 4.
•If the paged party does not answer, press the relevant line button to return to
the outside call.
4
To complete the transfer, press
•Even if you call all handsets, only the handset user who answers first can take
the transferred call.
To answer from the handset a transferred call:
–If the paging party announces the transfer, the
calling extension is displayed. Press
(HOLD) (INTERCOM)
•After the paging party hangs up the call or you press
the relevant soft key (
to the outside caller.
–If the paging party hangs up before you answer the page, "Incoming
call" is displayed. Press
) to take the transferred call.
LINE2
•Any users can take a transferred call by pressing the relevant soft key (
or ) on the handset or the relevant line button on the base unit.
LINE2
•If you do not announce the transfer and if the paged party does not answer within
60 seconds after you hang up, the transferred call will be returned to you with
ringing. If you still do not answer the caller's call within 4 minutes, the call will be
disconnected. You may answer the caller by pressing the relevant soft key
( or
LINE1 LINE2
before or during the ringing.
52
(LOCATOR/INTERCOM/TRANSFER)
to ).
(8)
.
to answer the page.
or
LINE1
) on the handset or the relevant line button on the base unit
(DIGITAL!SP-PHONE).
,
), you can talk
LINE2
, or the relevant soft key (
.
Ex. Base calling
Call from [0]
or
LINE1
or
LINE1