Auto Talk Feature - Panasonic KX-TG2720S Operating Instructions Manual

Programmable Settings

Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing
handset (p. 23), you can answer a call by lifting it off the charger. If you
want to use this feature, turn the feature ON by programming. Your phone
comes from the factory set to OFF.
Make sure the handset is not being used.
Press
1
(CONF/FUNCTION)
2 Scroll to "Initial setting" by pressing
or
Ö Ñ
Press
3
á
4 Scroll to "Auto talk" by pressing
.
Ñ
5 Press
á
•The current setting is displayed.
6 Select "On" or "Off" by pressing
7 Press the right soft key (
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
•In order to view Caller ID information after you lift up the handset to answer a call,
leave the Auto Talk feature OFF.
20
.
.
.
or . If you purchase an additional
.
or
Ö
or
Ö Ñ
).
SAVE
---------------
H
Save directory
Ringer setting
Copy directory
H
Initial setting
2Way radio mode
---------------
H
LCD contrast
Auto talk
LCD contrast
H
Auto talk
Room monitor
Auto talk
GF
LINE1 LINE2
.
Auto talk
GF
LINE1 LINE2
Auto talk
.
:Off
S A V E
:On
S A V E
:On