Shutting Down The Unit; Lowering The Mast - Generac Power Systems MAGNUM MLT4200IF4V Operating Manual

Parameter
920 Scheduler (5) Start Time
921 Scheduler (5) Start Day
922 Scheduler (5) Start Week
923 Scheduler (5) Duration
924 Scheduler (6) Start Time
925 Scheduler (6) Start Day
926 Scheduler (6) Start Week
927 Scheduler (6) Duration
928 Scheduler (7) Start Time
929 Scheduler (7) Start Day
930 Scheduler (7) Start Week
931 Scheduler (7) Duration
932 Scheduler (8) Start Time
933 Scheduler (8) Start Day
934 Scheduler (8) Start Week
935 Scheduler (8) Duration
1001 Time of Day
1002 Day of Month
1003 Month of Year
1004 Year

SHUTTING DOWN THE UNIT

Check with personnel using power supplied by the unit and let them know the power is going to be turned off. Make
sure the power shut down will not create any hazards by accidentally turning off equipment that needs to be kept on
(pumps, compressors, lights, etc.).
1. Remove all loads from the receptacles.
2. Switch the individual circuit breakers for each light to the OFF (O) position.
3. Switch the main circuit breaker to the OFF (O) position.
4. Press the Stop/Reset (O) button.
5. After the unit shuts down, move the Control Power switch to the OFF (O) position.
Note: For extended storage time, disconnect the battery. For extended storage requirements, refer to the engine
operator's manual.

LOWERING THE MAST

ELECTRICALLY LOWERING THE MAST
1. Shut down the lights and engine, refer to
minutes before lowering the mast.
2. Press and hold the winch control switch downward to collapse the mast to its lowest position. Ensure the electrical
cord does not get caught in, or pinched by, the mast while it is being lowered.
30
Description
Configuration Parameters - Time and Date
"Shutting Down the Unit" on page
Details
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
1-31
1-12
0-99
30. Allow the lights to cool 10-15