Remote Controller Operation
Adjusting desired temperature
On each screen, press the
NOTE
You can adjust the desired temperature by 0.1, 0.5, 1 °C. (Default 0.5°C)
Setting the set temperature
On each screen, press the
adjust the set temperature by pressing the
NOTE
When the Reference temperature to control is Water Outlet, you can set the temperature only for Water
Outlet.
When the Reference temperature to control is Indoor, you set the temperatures for Indoor and Water
Outlet.
In case of the model that can support both, you can set only the temperature for Indoor but the
temperature for Water Outlet is also affected together.
Depending on the Reference Temperature set for cooling and heating, the controllable temperatures are
restricted for each mode.
Water Outlet
Indoor Temp
English
8
or
button to adjust the temperature.
or button to select a desired menu and then press the the
or
Auto
Water Law
-
button.
button. You can
Cool & Heat
Water Outlet
Indoor Temp