Advertisement
8. Initial operation
L The summer/winter time rule for Central Europe is preset.
After the RAMSES top3 devices have been mounted and
connected and the batteries have been inserted in 8119200,
8139200, the date/time and – if desired – a different
summer/winter time have to be entered.
Enter date and time
L The date and time setting can be skipped when connect-
ing to the app. The clock thermostat then adopts the time
and date of the mobile device.
Use +/– to enter the desired hour.
†
Confirm with >.
†
Use +/– to enter the desired minute.
†
Confirm with >. The year appears.
†
Confirm the year with >. The two digits for the month on
†
the right flash.
Enter the month with +/–.
†
Confirm with >.
†
Enter the day with +/–.
†
Confirm with >.
†
The device is now ready for operation. The display shows the
weekly program P1, the actual temperature, the set tempera-
ture at the bottom left and the current time at the bottom
right.
L Date and time can also be changed in the
If you purchased a wireless clock thermostat (8130200), then
after entering the time and date, you must connect the unit to
the receivers, see Page 11.
Enter a different summer/winter time
You can change the summer/winter time under Settings
(see Page 7).
→
Change set temperature briefly
L The changed set temperature is not saved in the program
and will be replaced by the next programmed switching
time. This also applies when the programs P1 – P3 are
active.
If the comfort, setback or frost protection temperature is
active, the changed set temperature applies permanently.
Press > to access the main menu.
†
Press + here. The set temperature flashes.
†
Use +/– to enter the desired set temperature.
†
Confirm with >.
†
1. Main menu: Set/change operating modes
Scroll through the main menu with > (or back with <).
†
Use + to select the desired function.
†
Change the value with + or – .
†
Confirm with >.
†
Programs P1 – P3
There are 3 preset weekly programs available:
12:00
12:00
12:00
20:00
20:00
20:00
main menu.
07:00
07:00
07:00
22:00
22:00
22:00
Select the desired programme with >.
†
Confirm with +.
†
If you want to change the program (switching times), you
†
can do this under Settings
Comfort, setback and frost protection temperature
You can select these 3 operating modes and change them if
necessary.
Select the desired preset program with >.
†
Confirm with +.
†
Use + or – to set the desired value.
†
Confirm with >.
†
2. Submenu: Settings
In the submenu Settings
sation, PIN, controller, pump protection, etc. can be set.
Press > 2 x and go to Settings
†
Confirm with +. The flashing Bluetooth symbol appears.
†
Bluetooth
When the Bluetooth symbol
can connect to the RAMSES top3 app on your smartphone or
tablet (see Page 7).
Mon Tue Wed Thu Fri Sat Sun
(21 °C)
(21 °C)
(21 °C)
(17 °C)
(17 °C)
(17 °C)
(21 °C)
(21 °C)
(21 °C)
(17 °C)
(17 °C)
(17 °C)
→
, programs, display, wall compen-
flashes, the clock thermostat
.
with >.
4
Advertisement
