2. By Selecting Stored Data
Operating Procedure
6
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [Target] screen.
3.
Press the UP key or DOWN key to
select [Select from Stored Data] and
then press the ENTER key.
4.
The screen for selecting the target to
be registered is displayed. Press the
UP key or DOWN key to select the
target.
8
3, 5, 6, 7
1
74
[Target] - [Select from Stored Data]
3, 4, 6
2, 4, 6