Selecting The Color Correction Factor (C.c.f.) - Konica Minolta CHROMA METER Instruction Manual

LS-specific menu (Not shown for CS)

Selecting the Color Correction Factor (C.C.F.)

If you know the color correction factor for the light source to be measured in advance, you
can input the value into the instrument to display a corrected measured value.
* Factory setting: OFF
Operating Procedure
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [Meas. Cond.] screen.
3.
Press the UP key or DOWN key to
select [CCF] and then press the
ENTER key.
7 3, 5, 6
1
40
[Meas. Cond.] -
[CCF]
3, 4, 6
2, 6