Selecting The Decimal Places For The Chromaticity Display - Konica Minolta CHROMA METER Instruction Manual

CS-specific menu (Not shown for LS)

Selecting the Decimal Places for the Chromaticity Display

You can select to use four or three decimal places for the chromaticity display. If the
measured value displayed on the LCD screen fluctuates and is hard to read, select three
decimal places.
* Number of decimal places for chromaticity display: 4 places or 3 places
* Factory setting: 4 places
Operating Procedure
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [Meas. Cond.] screen.
3.
Press the UP key or DOWN key to
select [x,y Dec.places] and then press
the ENTER key.
5
1
38
[Meas. Cond.] -
[x,y Dec.places]
3
3, 4
2