Checking The Measurement Result - Konica Minolta CHROMA METER Instruction Manual

Checking the Measurement Result

You can check the measured values being stored by following the procedure below.
Operating Procedure
5
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [Meas. Result] screen.
3.
Press the UP key or DOWN key to
select [Check] and then press the
ENTER key.
6
1
86
[Meas. Result] -
3
3, 4
2, 5
[Check]