Daikin Clima-Flex CLIV Series Installation, Operation And Maintenance Manual page 37

Controller Use
Press PGR: the value flashes, press UP/DOWN PRsGolf for heat
pump units, confirm.
Press DOWN to display the heating set point (SEtH).
Press DOWN: the unit on/off command (UnSt) appears.
Press DOWN: the command to change the cooling mode so(Clo)
/at Assistance level and for A/W reversible units appears. heating
(H) (ModE) - only for heat pump units.
Press DOWN: the manual defrost command (dFr) appears.
www.clima-flex.com
Press DOWN: the command to cancel the alarm log (ClrH)
appears - Assistance level only.
Press DOWN: the selection of units of measurement (UoM)
appears.
• Once you have finished the modifications, you can exit in two
ways:
• At category level select ESC and press PRG;
• Press PRG for 3 s
!
The installer must take these procedures into account; his
personnel must be qualified and certified to perform the
installation in order to comply with all specifications and
good practices to ensure proper operation of the unit.
37
!
WARNING
iom-cliv-cf-eng