Daikin Clima-Flex CLIV Series Installation, Operation And Maintenance Manual page 36

Go to the standard display.
Press DOWN: CMP indicates that compressor 1 is on (o) and
compressor 2 is off (_).
Press DOWN: EuP1 indicates the evaporating temperature of
circuit 1 (3.8°C).
Press DOWN: Cnd1 indicates the condensing temperature of
circuit 1 (40.8°C).
To return to the standard display, press PRG (which corresponds
to ESC).
iom-cliv-cf-eng
SHORTCUT FUNCTIONS
Only basic configuration parameters such as direct commands
and active alarms can be accessed through the user terminal
without password, or with password to those dedicated to unit
configuration and optimization.
Press DOWN for 3 s to access the direct access functions:
• Set point;
• Switching the unit on and off;
• Change of the operating mode (cooling/heating, only on
reversible units);
• Selection of the units of measurement.
In programming mode, the lower line indicates the parameter
code and the upper line the value.
Go to the standard display
Press DOWN for 3 s: the current set point (SEtA) is displayed -
read only.
Press DOWN: the cooling set point (SEtC) is displayed.
36
Controller Use
www.clima-flex.com