Table of Contents
Advertisement
Installation Procedure
Step 1 Checking and preparing
accessories
The following accessories are supplied with the indoor
unit. The type and quantity may differ, depending on the
specifications.
Pattern sheet A (1)
Pattern sheet B (1)
Insulation pipe
(Liquid side1, gas side1)
Installation manual
Cable-tie
Installation gauge(1)
6 English
Drain hose
Insulation drain hose (1)
User manual
Clamp
Step 2 Choosing the installation
location
Installation location requirements
•
There must be no obstacles near the air inlet and
outlet.
•
Install the indoor unit to a ceiling that can support its
weight.
•
Maintain sufficient clearance around the indoor unit.
•
Before installing the indoor unit, be sure to check
whether the chosen location has proper drainage
possibilities.
•
The indoor unit must be installed such that it is beyond
public access and is not touchable by users.
•
A vibration-resistant location that is not inclined (If the
indoor unit is installed on a structure that is not sturdy,
it may fall and get damaged or cause injury.)
•
Where it is not exposed to direct sunshine.
•
Where the air filter can be removed and cleaned easily.
•
A location where animals cannot access and urinate on
the product. Ammonia may be generated.
Advertisement
Table of Contents
