Samsung AC BN6PKG Series Installation Manual page 37

Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common steps for
setting the addresses and options on page 23.
Option SEG1 SEG2
Function Page Mode
Indication Indication Details Indication Details
and
0 D
details
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1 SEG2
Function Page Mode
Indication 0 D
Step 16. Optional: Installing DPM (Digital Packaged Multi)
NOTE
Only AC052/071BN6PKG models are available to install DPM.
To find DPM allowable indoor unit models according to outdoor unit models, refer to outdoor installation manual.
• When installing DPM, you should set "DPM setting" to the outdoor unit.
• You do not need to set the address manually for the indoor unit.
• If DPM model is not set, communication error may occur.
• While the outdoor unit is tracking the indoor unit for one minute after the power supply is turned on, the operation may
stop if the remote control reception signal of the installed indoor unit is different.
• To enable Level control with the centralized controller, refer to page 35 ~ 36.
CAUTION
• When installing DPM, only one external controller can be connected.
SEG3
Type of the option to change Tens position of the option number
Indication Details Indication
Option type 0 to F Tens position value
SEG3
Tens position of the option
Type of the option to change
2
SEG4 SEG5
Units position of the option number
Details Indication
0 to 9 Units position value
SEG4 SEG5
Units position of the option number
number
1
SEG6
New value
Details Indication Details
0 to 9 New value 0 to F
SEG6
New value
7 1
English 37