Samsung AC BN6PKG Series Installation Manual page 33

Hide thumbs Also See for AC BN6PKG Series:
Table of Contents

Advertisement

3
Check whether the option values that you have set are
correct by pressing the
[SEG2, SEG3]
[SEG4, SEG5]
[SEG11, SEG12]
[SEG14, SEG15]
[SEG21, SEG22]
[SEG23, SEG24]
4
Save the option values into the indoor unit:
Point the remote control to the remote control sensor on
the indoor unit and then press the
the remote control twice. Make sure that this command
is received by the indoor unit. When it is successfully
received, you can hear a short sound from the indoor unit.
If the command is not received, press the
button again.
5
Check whether the air conditioner operates in accordance
with the option values you have set:
a
Reset the indoor unit by disconnecting and then
reconnecting the power cable of the indoor unit or by
pressing the RESET button on the outdoor unit.
b
Remove the batteries from the remote control, insert
them again, and then press the
the remote control.
(Mode) button repeatedly.
[SEG6, SEG8]
[SEG9, SEG10]
[SEG16, SEG17]
[SEG18, SEG20]
(Power) button on
(Power)
(Power) button on
Setting the indoor unit addresses
Option No. for an indoor unit address:
0AXXXX-1XXXXX-2XXXXX-3XXXXX
Before installing an indoor unit, be sure to set an address for
the indoor unit by taking the following steps:
1
Make sure that the power is supplied to the indoor unit. If
the indoor unit is not plugged in, it must include a power
supply.
2
Make sure that the panel is connected to the indoor unit
so that it can receive options.
3
Set an address for each indoor unit using the remote
control, according to your air conditioning system plan, by
referring to the following table and by following the steps
in Common steps for setting the addresses and options
on page 23.
The indoor unit addresses (main and RMC
addresses) are set to 0A0000-100000-200000-
300000 by default.
If indoor units and outdoor units match 1:1, you
don't need to set the addresses.
The main address of each indoor unit is set
automatically. However, you can set the main
address manually if the relevant outdoor option is
set to MANUAL ADDRESS.
Indoor Unit
English
33

Advertisement

Table of Contents
loading

Table of Contents