Table of Contents
Advertisement
Safety Information
CAUTION
Make sure that you earth the cables.
• Do not connect the earth wire to the gas pipe, water
pipe, lighting rod or telephone wire. If earthing is not
complete, electric shock or fire may occur.
Install the circuit breaker.
• If the circuit breaker is not installed, electric shock or
fire may occur.
Make sure that the condensed water dripping from the
drain hose runs out properly and safely.
Install the power cable and communication cable of
the indoor and outdoor unit at least 1m away from the
electric appliance.
Install the indoor unit away from lighting apparatus
using the ballast.
• If you use the wireless remote control, reception error
may occur due to the ballast of the lighting apparatus.
Installation Procedure
Step 1 Checking and preparing
accessories
The following accessories are supplied with the indoor
unit. The type and quantity may differ, depending on the
specifications.
User & Installation manual
(1)
Flexible hose (1)
Do not install the air conditioner in following places.
• Place where there is mineral oil or arsenic acid. Resin
• The place where corrosive gas such as sulphuric acid
• The copper pipe or connection pipe may corrode and
• The place where there is a machine that generates
• The place where there is a danger of existing
• The place where thinner or gasoline is handled. Gas
Clamp hose
(1)
Insulation drain (1)
parts flame and the accessories may drop or water
may leak. The capacity of the heat exchanger may
reduce or the air conditioner may be out of order.
gas generates from the vent pipe or air outlet.
refrigerant may leak.
electromagnetic waves. The air conditioner may not
operate normally due to control system.
combustible gas, carbon fibre or flammable dust.
may leak and it may cause fire.
Thermal insulation
sponge A (1)
Thermal insulation
sponge B (1)
Thermal insulation
sponge C (1)
Cable-tie (8)
Rubber
(8)
23
English
Advertisement
Table of Contents
