Note:
3.
Click the Start Software Upgrade button; the 'Load a cmp file' screen appears
Note:
4.
Click the Browse button, navigate to the cmp file and click the button Send File; the cmp file
is loaded to the MG 3200 and you're notified as to a successful loading (refer to
Figure 7-3: cmp File Successfully Loaded into the MG 3200 Notification
H.248/SIP
At this point, the process can be canceled with no consequence to the MG
3200 (click the Cancel button). If you continue the process (by clicking the
Start Software Upgrade button, the process must be followed through and
completed with a MG 3200 reset at the end. If you click the Cancel button in
any of the subsequent screens, the MG 3200 is automatically reset with the
configuration that was previously burned in flash memory.
When in the Wizard process, the rest of the Web application is unavailable and
the background Web screen is disabled. After the process is completed,
access to the full Web application is restored.
Figure 7-2: Load a cmp File Screen
36
Media Gateway 3200
(Figure
7-2).
Figure
7-3).
Document #: LTRT-73804