Figure 7-5: Load A Cpt File Screen; Figure 7-6: Finish Screen - Nortel MG 3200 Installation Manual

7. Follow the same procedure you followed when loading the ini file (refer to Step 6). The same
procedure applies to the 'Load a VP file' (not applicable to the MG 3200 gateway) screen
and 'Load a coefficient file' screen.
8. In the 'FINISH' screen (refer to
upgrade process by clicking Reset or Cancel.
Button Result
Reset The MG 3200 'burns' the newly loaded files to flash memory. The 'Burning files to flash
memory' screen appears. Wait for the 'burn' to finish. When it finishes, the 'End Process'
screen appears displaying the burned configuration files (refer to
Cancel The MG 3200 resets, utilizing the files previously stored in flash memory. (Note that
these are NOT the files you loaded in the previous Wizard steps).
H.248/SIP

Figure 7-5: Load a CPT File Screen

Figure 7-6), the Next button is disabled. Complete the

Figure 7-6: FINISH Screen

38
Media Gateway 3200
Figure 7-7).
Document #: LTRT-73804