If the 24-V signal is interrupted, the safety position is set as described in chapter "Pneumatic
connection (Page 35)".
Communication with the master is still possible. The "Jumper" on the electronics is used to
activate this function. It can be accessed after removing the module cover, and must be
switched from the right position (delivery state) to the left position.
4.2
Electrical connection
4.2.1
SIPART PS2 with 4 to 20 mA/HART
①
②
③
Figure 4-1
①
②
Figure 4-2
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
Setpoint 4 ... 20 mA, terminals 6 and 7
Digital input DI1, terminals 9 and 10
HART connection
Connection diagram for electronics 2-wire
Setpoint 4 ... 20 mA, terminals 3 and 8
Digital input DI1, terminals 9 and 10
Connection diagram for electronics, 2/3/4-wire, with wiring configuration 2-wire
4.2 Electrical connection
Connecting
27