Monitor/Test; Monitor/Test Screen - Mitsubishi MELSEC-Q Q62DAN User Manual

5 UTILITY PACKAGE (GX Configurator-DA)

5.6 Monitor/Test

5.6.1 Monitor/test screen

5 - 17
[Purpose]
Start buffer memory monitoring/testing and I/O signal monitoring/testing,
operating condition setting, offset/gain settings (refer to Section 5.6.2, 5.6.3),
pass data (refer to Section 5.6.5, 5.6.6)from this screen.
[Operating procedure]
Select monitor/test module screen
"Module model name"
Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer
Version 6 or later.
Refer to the GX Developer Operating Manual for details
[Setting screen]
"Start I/O No. "
Monitor/test
X/Y monitor/test
MELSEC-Q
"Module type"
1)
5 - 17