Offset/Gain Setting Operation (Function Version B Or Earlier) - Mitsubishi MELSEC-Q Q62DAN User Manual

5 UTILITY PACKAGE (GX Configurator-DA)

5.6.3 Offset/gain setting operation (Function version B or earlier)

5 - 22
Perform the offset/gain setting operation in the following sequence.
(1) Switch to the offset/gain setting mode
Change switch 4 for intelligent function module switch setting to the offset/gain
setting mode (see Section 4.5).
(2) Switch to the offset/gain setting screen
Display the offset/gain setting screen using the operation described in Section
5.6.1.
(3) Specify a channel
Specify the target channel of offset setting or gain setting on the channel No.
combo box.
(4) Specify offset/gain setting
Specify either offset setting or gain setting on the channel specified on the
channel No. combo box using the radio button.
(5) Set up adjustment values
Set up an adjustment value of the offset value or gain value. Select "1," "10,"
"100," or "1000" on the combo box, however, you can also set up adjustment
values by entering a number (1 to 3000).
MELSEC-Q
5 - 22