APPENDIX
APPENDIX
Appendix 1 Function upgrade for the D/A converter module
The D/A converter modules of function versions B and C have more functions than the
conventional model (function version A).
This section describes a comparison of functions of the D/A converter module based
on the function additions, combinations with GX Configurator-DA software version and
precautions when replacing the module.
Appendix 1.1 A comparison of functions of the D/A converter module
The following table indicates the functions supported by the corresponding function
versions.
Function
D/A conversion enable/disable function
D/A output enable/disable function
Synchronous output function
Multiple CPU system compatibility
Analog output test during programmable controller CPU STOP
Resolution mode
Normal resolution mode
High resolution mode
High resolution mode status flag (X8)
Online module change
Switching between normal mode and offset/gain setting mode
Dedicated instruction (G(P).OFFGAN)
Buffer memory (mode switching setting) and Operation
Condition Setting Request (Y9)
GX Configurator-DA
Intelligent function module switch setting
App - 1
Function version A Function version B Function version C
—
—
—
—
: Compatible
MELSEC-Q
—
—
: Not compatible
App
App - 1