Mitsubishi CP800E Operation Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Manuals
  4. Media Converter
  5. CP800E
  6. Operation manual
Mitsubishi CP800E Operation Manual

Mitsubishi CP800E Operation Manual

Colour video copy processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
COLOUR VIDEO COPY PROCESSOR
MODEL
CP800E
OPERATION MANUAL
POWER
REMOTE
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
COLOUR VIDEO COPY PROCESSOR.
This video copy processor complies with the requirements of the EC Directive
89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains
proper operation in residential areas, on business and light industrial premises
and on small-scale enterprises, inside as well as outside of the buildings. All
places of operation are characterised by their connection to the public low
voltage power supply system.
CP800
MONITOR
MEMORY
PRINT
OPEN

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi CP800E

Summary of Contents for Mitsubishi CP800E

  • Page 1 COLOUR VIDEO COPY PROCESSOR MODEL CP800E OPERATION MANUAL CP800 MONITOR MEMORY PRINT POWER OPEN REMOTE THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR COLOUR VIDEO COPY PROCESSOR. This video copy processor complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.

  • Page 2: Table Of Contents

    CONTENTS Contents Safety precautions ................1-3 Special features ..................4 Features and functions ................5-7 Front panel ..................... 5 Rear panel ..................... 6 Remote control ..................7 Connections ..................8-13 Connection with a monitor ..............8-10 Connection with video or S-video signal equipment ......10 Connection with RGB analog signal equipment ........

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Colour Video Copy Processor is designed for operation on 220-240V, 50Hz AC. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE EARTHED.
  • Page 4 SAFETY PRECAUTIONS INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the top, sides and bottom of this unit. Place the unit on a hard and level surface and locate at least 10cm from walls to insure proper ventilation. When putting the unit on the system rack, take a space between the unit and the back of the rack.
  • Page 5 SAFETY CHECKS Periods: According to the recommendations of the manufacturer of the medical device. Scope: a) Visual inspection Housing, leads, controls, displays, labels/markings, accessories, operation manual. b) Functionality test Testing of functions (according to operation manual) as well as compatibility and usability of device and accessories.

  • Page 6: Special Features

    MULTI PRINT FUNCTION BY THE CAPACIOUS FRAME MEMORY Large capacity of frame memory can store max.16 images (in 4 sheets) in multi-4-image mode. CP800E can store an image during its printing, so the time of diagnosis will be shorten remarkably.

  • Page 7: Features And Functions

    FEATURES & FUNCTIONS FRONT PANEL CP800 MONITOR MEMORY PRINT POWER OPEN REMOTE 1 REMOTE TERMINAL 6 MEMORY BUTTON Connects the remote control supplied. Press to memorize the image to be printed. 2 POWER BUTTON 7 PRINT BUTTON Press to turn on power. Press again to turn off power. Press to print the image memorized by the MEMORY When the power is turned on, the indicator above this button button.

  • Page 8: Rear Panel

    FEATURES & FUNCTIONS REAR PANEL RS-232C REMOTE VIDEO SCREW S-VIDEO AC IN IMPEDANCE POWER G/G+SYNC H+V-SYNC 75 / HIGH 75 / HIGH HIGH HIGH SYNC HIGH HIGH HIGH G/G+SYNC H+V-SYNC 75 / HIGH HIGH Potential equalization connector This is used to equalize the potential of the equipment connected to the unit.

  • Page 9: Remote Control

    REMOTE CONTROL 5 SET BUTTON Press to display the items of the MENU. Repress to memorize the values and exit the MENU mode. See page DISPLAY 6 STOP BUTTON COLOR FIELD PROG. ADJUST /FRAME Press with the left side button at the same time to cancel the printing process.

  • Page 10: Connections

    CONNECTIONS The functions of this unit can be set by the menu screens displayed on the monitor. • Connection with a monitor • Connection with VIDEO/S-VIDEO signal equipment • Connection with RGB analog signal equipment • Connection with RS-232C equipment Connect this unit with a monitor to check the images to be printed and the images stored in memory.
  • Page 11 4 Press { { or } } button to select “IN SYNC”. The sync. signal level being selected, for example, “TTL,SOG” is displayed. 5 Set the sync. signal level according to the equipment to be [ or ] ] button to select “0.3V” or connected.

  • Page 12: Connection With Video Or S-Video Signal Equipment

    CONNECTIONS C Press SET button. “CHANGE : OK/CANCEL” is selected. Press [ or ] button to select “OK” or “CANCEL”. D Select “OK”, then press SET button. SERVICE MENU is displayed. E Press SET button. “SAVE : OK” is selected. F Select “OK”, then press SET button.

  • Page 13: Connection With Rgb Analog Signal Equipment

    CONNECTION WITH RGB ANALOG SIGNAL EQUIPMENT Make sure to turn off the power before setting. (EXAMPLE) RGB analog signal equipment To RGB analog SCAN START input teminals ( RECORD CONTRAST SCAN SPEED REPLAY GREEN GREEN BRIGHTNESS BRIGHTNESS Connection is not BLUE BLUE 10 KEY...

  • Page 14: Connection With Rs-232C Equipment

    CONNECTIONS CONNECTION WITH RS-232C EQUIPMENT This unit can controlled through a RS-232C port with custom software. (Image data can not be input.) For the protocol, consult your dealer. Make sure to turn off the power before setting. 2 2 2 2 2 RS-232C TERMINAL SIGNAL Pin number To RS-232C terminal ( RS-232C )
  • Page 15 4 Press ] ] button. REMOTE SET MENU is displayed. Set BAUD RATE on this menu. 5 Press { { or } } button to select “BAUD RATE”. The setting BAUD RATE (e.g. 9600) will be displayed. 6 Press [ [ or ] ] button to select “1200”, “2400”, “4800”...

  • Page 16: Before Operation

    BEFORE OPERATION Before printing, 1. Remove the transport screw on the bottom of printing mechanism and the protective cushion. (See below) 2. Install the print paper and ink cassette. (pages 15-17) PAPER SHEET SET AND INK SHEET When using this unit for printing, make sure to use the following types of paper sheet and ink sheet set.

  • Page 17: Installation Of Print Paper

    2 2 2 2 2 REMOVING THE PROTECTIVE CUSHION Unplug the power cord from outlet for safety. 1 Press OPEN button. The printing unit advances to the front. NOTE Do not touch the thermal head. Fingerprints or dust on the thermal head will degrade the print quality. 2 Remove the protective cushion from the right side of the unit.

  • Page 18: Installation Of Ink Sheet

    BEFORE OPERATION Roller Roller Roller 3 Insert the print paper under Roller 1 and 2 in order. 4 Insert the edge of the print paper under Roller 3. Be sure to insert the paper straight. Print paper Paper Paper Paper 5 Feed the print paper through the paper outlet with your hand.
  • Page 19 1 Put the coloured roller of the ink sheet to the ink cassette. AB White roller 2 Put the thin stick of white roller to the ink cassette. C 3 Put the thick stick of white roller to the ink cassette. DE On the D position, turn the roller and set the notch of the roller side to the hole of the cassette.

  • Page 20: Usage And Keeping Of Paper Sheet Set

    BEFORE OPERATION USAGE AND KEEPING OF PAPER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank part due to hand’s dust or oil.

  • Page 21: Printing (Basic)

    PRINTING (BASIC) DISPLAY BEFORE PRINTING COLOR FIELD PROG. ADJUST /FRAME PRINT Q' ty 2 2 2 2 2 SELECTING FIELD/FRAME MENU CLEAR STOP Press FIELD/FRAME button on the remote control to select “FIELD” or “FRAME”. • Select “FRAME” for a high resolution still image printing. PRG.1 Q'ty 1 Select “FIELD”...
  • Page 22 PRINTING (BASIC) Press SET button. INPUT • “CHANGE : OK” is selected. INPUT : VIDEO/S-VIDEO/RGB • “OK” is selected. When changing the selected input signal, press ] button to select “CANCEL”. • Press SET button to select “INPUT.” CHANGE : OK/CANCEL 6 Press SET button.
  • Page 23 3 Press ] ] button. PRINT MENU MODE : AUTO/S GRAD : ES/ECHO/NOR • PRINT MENU is displayed. GAMMA MENU: PUSH[]] : S/N/H1/H2/H3 • Normally, “MODE” is selected when opening PRINT MENU. When other item is : OFF/ON/ADJ/DATA MIRROR : OFF/ON selected, press { or } button to select “MODE”.

  • Page 24: Memory Print

    PRINTING (BASIC) MEMORY PRINT In the single image mode, this unit has 8 FRAMES of image memory and can memorize 8 images in the FRAME mode or 16 images in the Field mode. The following functions are available. • Each time the FIELD/FRAME button is pressed, the display changes to show the PRG.1 Q'ty 1 Field or Frame mode.

  • Page 25: Selecting Memorized Image To Print

    5 Press PRINT button. • The image memory being printed will be indicated on screen. 6 After printing starts, repeat steps 1-5 to store and print other images. • If you wait until printing is finished, just repeat steps 2-5. 2 2 2 2 2 SELECTING MEMORIZED IMAGE TO PRINT 1 Press MONITOR button to select “MEMORY”...

  • Page 26: Image Size And Number Of Memory

    PRINTING (BASIC) 2 2 2 2 2 IMAGE SIZE AND NUMBER OF MEMORY PAGES As this unit has 1216 pixel x 600 lines x 8 frames of memory, the following memory operations are available. MODE : DIFF ( Multi printing the different images ) FRAME FIELD PRINT EXAMPLE...

  • Page 27: Multiple Copy Or Continuous Printing

    2 2 2 2 2 MULTIPLE COPY OR CONTINUOUS PRINTING No. of print setting Multiple copies of a memorized image can be made by setting the number of prints to more than one. The print quantity can be set for up to 100 prints or for continuous printing until the paper or ink is used up.

  • Page 28: Printing (Special)

    PRINTING (SPECIAL) Various types of printing are available by setting on the menu screen (MAIN MENU and SERVICE MENU). In this section, some examples of special prints are given. For each setting, see pages 32-35. MULTI PRINT MULTI PRINT is the function which 2, 4 or 6 images can be printed on a sheet. Use ADDITIONAL of MAIN MENU for setting.
  • Page 29 2 2 2 2 2 TWO IMAGE MULTI IMAGE OPERATIONS • Only one image is shown on screen when the multi mode is set to 2 same or different images. • To view the screen display to know which memory is being used, press DISPLAY button on the remote.

  • Page 30: Separate Print

    PRINTING (SPECIAL) SEPARATE PRINT • The SEPARATE print function inserts a white frame between 2 or more images. • Use ADDITIONAL of MAIN MENU for setting. See page 39. NOTE The distance between images in multi print is different between on the monitor and the printed image.

  • Page 31: External Remote Terminal 1

    EXTERNAL REMOTE TERMINAL 1 The image can be stored in memory by sending the remote signal through the external remote terminal on the rear panel. When the MEM&PRN(MEMORY & PRINT) function is set to ON, the image will be printed after being stored in memory. •...

  • Page 32: External Remote Terminal 2

    PRINTING (SPECIAL) EXTERNAL REMOTE TERMINAL 2 The image can be stored in memory and printed by sending the remote signal through the external remote terminal on the rear panel. • Make out the necessary circuit to use this function by referring to the following. 2 2 2 2 2 EXTERNAL REMOTE TERMINAL SIGNAL ALLOCATION (MINI DIN8PIN) 6 7 8...
  • Page 33 2 2 2 2 2 SYNCHRONOUS SETTING FOR MENU, BUSY TIMING BUSY MODE : PRN or MEM, V SYNC MEM : ON in REMOTE SET of SERVICE MENU V SYNC Image memorizing MEMORY 7.5msec. BUSY MODE : TIM, BUSY TIMING : 1V in REMOTE SET of SERVICE MENU V SYNC Image memorizing BUSY OUTPUT...

  • Page 34: Setting The Functions (Menu Chart)

    SETTING THE FUNCTIONS (MENU CHART) MONITOR DISPLAY CHART PRINT MENU OPERATION MODE : AUTO/S Monitor display GRAD : ES/ECHO/NOR Select MENU with { ,} button. GAMMA MENU : PUSH []] : S/N/H1/H2/H3 : OFF/ON/ADJ/DATA MIRROR : OFF/ON Press [ , ] button to change the value, CHANGE: OK/CANCEL select the mode or switch the item.
  • Page 35 Button function setting display KEY SET KEY LOCK : OFF/ON MEM&PRN : OFF/ON/R1/R2 MEM&STOP : OFF/ON MEM&MONI : OFF/ON PRN&CLR : OFF/PRN/MEM Analog image adjustment display CLEAR KEY : MLT/PAGE/ALL KEEP MONI : OFF/ON ANALOG ADJ CHANGE : OK/CANCEL CONT R-SUB Displays only when B-SUB...

  • Page 36: Lcd Display Chart

    SETTING THE FUNCTIONS (MENU CHART) LCD DISPLAY CHART OPERATION LCD display COLOR ADJ MENU The menus in the broken lines are indicated CONT R-SUB : 0 C by{ ,} button. G-SUB : 0 M B-SUB : 0 Y CENTER : PUSH [ > ] Press [ , ] buttons to change the value, ANALOG ADJ : PUSH [ >...
  • Page 37 Button function setting display KEY SET MENU KEY LOCK : OFF Analog image adjustment display MEM & PRN : OFF ON R1 R2 MEM & STOP : OFF MEM & MONI : OFF ANALOG ADJ MENU PRN & CLR : OFF PRN MEM CLEAR KEY : PAGE...

  • Page 38: Adjustments & Settings (Main Menu)

    ADJUSTMENTS & SETTINGS (MAIN MENU) MAIN MENU ITEMS MAIN MENU is used to open sub-menus. The functions are set with the following 6 menus. The settings can be saved by SAVE PRG. MAIN MENU COLOR : PUSH []] INPUT : PUSH []] COLOR ADJ Adjusts colour of printing image ADDITIONAL...
  • Page 39 PRINT MENU 5 Press [ [ or ] ] button to select an item or change value. MODE : AUTO/S GRAD : ES/ECHO/NOR GAMMA MENU : PUSH []] : S/N/H1/H2/H3 : OFF/ON/ADJ/DATA MIRROR : OFF/ON CHANGE: OK/CANCEL 6 Press SET button. PRINT MENU MODE : AUTO/S...

  • Page 40: Color Adj Colour Adjustment

    ADJUSTMENTS & SETTINGS (MAIN MENU) COLOR ADJ Colour adjustment COLOR ADJ • The colour of the source image and memorized image can be adjusted. CONT : 0 R-SUB : 0 C • Open this menu also by pressing the COLOR ADJ button on the remote control. G-SUB : 0 M B-SUB : 0 Y CENTER...

  • Page 41: Additional Special Print Setting

    ADDITIONAL Special print setting MULTI Selects ON or OFF for printing 2, 4, or 6 images on a sheet. ADDITIONAL MULTI : OFF/ON Multi-image print is available. MODE : SAME/DIFF Multi-image print is not available. IMAGES : 2/2s/4/6/6s SEPARATE: OFF/ON BUZZER : OFF/T1/T2 MODE...

  • Page 42: Print Print Setting

    ADJUSTMENTS & SETTINGS (MAIN MENU) PRINT Print setting MODE Selects the print size. Normally select the ink sheet size which installed in this unit. (See pages 14 for the print paper.) PRINT MENU MODE : AUTO/S AUTO L size ink sheet GRAD : ES/ECHO/NOR GAMMA MENU : PUSH []]...
  • Page 43 COM (Comment) Selects the comment on printing. Does not print comments. Prints the comment you made. Prints the set value made on the ANALOG ADJ menu. • The following information is printed. ADJ +1 ; +2 ; -1 ; -2 ; -3; +14 ; -15 ; +15 ; -17 ; +18 BRT CONT ANALOG R-SUB...

  • Page 44: Comment Making A Comment

    ADJUSTMENTS & SETTINGS (MAIN MENU) COMMENT Making a comment COMMENT This menu is used to enter a comment. The comment is 48 characters long. 0123456789ABCDEFGHI JKLMNOPQRSTUVWXYZ+ - When the 2 image mode is used in the small media, the printed comment is the first 37 / = ( ) , .

  • Page 45: Size/Timing Setting Size And Timing

    4 Select a desired letter with { { , } } , [ [ or ] ] button. COMMENT The selected letter will blink in red. 0123456789ABCDEFGHI JKLMNOPQRSTUVWXYZ+ - / = ( ) , . ; : & ! ? CAPS SHIFT INS DEL CLR CHANGE: OK/CANCEL...

  • Page 46: Adjustments & Settings (Main Menu)

    ADJUSTMENTS & SETTINGS (MAIN MENU) COPY Copy a printed image size which is set W, M, or N in size. The selected setting level is displayed as TOP, BOTTOM, LEFT and RIGHT. These levels become the changing base. TOP/BOTTOM/LEFT/RIGHT Sets the printing area of the image. Adjust the size with [ or ] button.

  • Page 47: Adjustments & Settings (Service Menu)

    ADJUSTMENTS & SETTINGS (SERVICE MENU) SERVICE MENU ITEMS KEY SET Selects the functions of the buttons and function of remote SERVICE MENU KEY SETTING : PUSH []] terminal. SIGNAL SET1 : PUSH []] SIGNAL SET2 : PUSH []] SIGNAL SET1 Sets even/odd number of FIELD, adjusts display, input signals etc.

  • Page 48: Key Set Setting Functions Of Buttons

    ADJUSTMENTS & SETTINGS (SERVICE MENU) KEY SET Setting functions of buttons KEY LOCK Makes the function on the remote control buttons invalid. KEY SET KEY LOCK : OFF/ON The function on the remote control buttons, except MEMORY, MEM & PRN : OFF/ON/R1/R2 PRINT, MONITOR and MEMORY PAGE are not available.

  • Page 49: Signal Set1 Signal Setting Display

    • In the following cases, the monitor display is automatically switched to the source image even if ON is selected. • “MULTI : 2s” is selected on ADDITIONAL menu of MAIN MENU. • “SPCL TIMING : ON” and “H-POSI : -10 to -65” are selected on SIGNAL SET2 menu of SERVICE MENU.

  • Page 50: Signal Set2 Signal Setting Display

    ADJUSTMENTS & SETTINGS (SERVICE MENU) R-SUB Adjusts the red colour of the image on the monitor screen. When pressing [ button, colour will be bluish and pressing ] button, colour will be reddish. • This function does not reflect to print image. B-SUB Adjusts the blue colour of the image on the monitor screen.

  • Page 51: System Set System Setting Display

    AUTO CUT Sets to cut the printed paper automatically or not. AUTO CUT is available. Cuts the printed paper automatically when starting next Gray part is print. Pressing MONITOR button and MEMORY button at cut when the same time is also available to cut the printed paper. MARGIN CUT is ON.

  • Page 52: Previous Error Error Display

    ADJUSTMENTS & SETTINGS (SERVICE MENU) RESPONSE Selects whether this unit sends RS-232C response to the host computer or not. RET (Return) Sends response. Not send response. BUSY LEVEL Selects how to output the BUSY signal of the remote terminals 1 and 2 on the rear panel. H (High) The VCP cannot accept the remote input signal when the signal is “HIGH”.

  • Page 53: Error Messages

    ERROR MESSAGES & COUNTERMEASURES ERROR MESSAGES If for some reason printing is not possible or error occurs during printing, the error message will be displayed on the monitor screen or LCD. In this case, follow the procedure described below. Error messages Causes Countermeasures •...

  • Page 54: Before Calling For Service

    ERROR MESSAGES & COUNTERMEASURES BEFORE CALLING FOR SERVICE 2 Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer. Symptom Check and Remedy No power Is the power cord plug disconnected from the outlet:...
  • Page 55 Symptom Check and Remedy The stored image in the memory cannot be Is the S size ink sheet installed when selecting “S” in “MODE : AUTO/S”? Or enlarged to fill the maxim print area. is the L size ink sheet installed when selecting “AUTO” in “MODE : AUTO/S”? Check the current setting.

  • Page 56: Overcoming Paper Jams

    ERROR MESSAGES & COUNTERMEASURES OVERCOMING PAPER JAMS 1 Press OPEN button to pull out the printing unit. When it is not working, turn off the power once. Then try to press OPEN button again. 2 Remove the ink cassette. Unlock the ink cassette by pushing the cassette locking lever to inside. 3 Turn the knob on the right side of the printing unit clockwise.

  • Page 57: Cleaning

    CLEANING A small amount of alcohol Cleaning as the following shows helps the stable use of this unit for a longer term. Cleaning part Preparations How to fold tissue paper Alcohol (isopropyl alcohol) Tissue paper (Fold in half about 4 times, and use the folded side to Metal spatula clean) Cotton buds...

  • Page 58: Cleaning

    ERROR MESSAGES & COUNTERMEASURES Clean this unit as following steps every 10 roles of sheet. Make sure to turn OFF the power first. 1 Cleaning paper guide shaft. The seal paste is stuck on the ditch part of the shaft if you use it for a long time. Wipe with tissue paper etc.

  • Page 59: Spec & Options

    SPEC & OPTIONS SPECIFICATIONS Class Colour Video Copy Processor Model CP800E Printing method Dye Sublimation Thermal Transfer 3 colour faces progressive printing (yellow, magenta and cyan) Print quality Dot resolution Max. 1216x 600 pixels (S size) Number of grades 256 (8 bits) for each colour ( About 16.7 million colours)
  • Page 60 Polígono Industrial “Can Magí”, Calle Joan Bucallà 2-4, Apartado de Correos 420, 08190 Sant Cugat del Vallês, Barcelona, Spaín Phone (3) 589-3900 FAX (3) 589-4448 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan Made from recycled paper 871C959C5 PRINTED IN JAPAN...

Table of Contents