6 PROGRAMMING
6.1.1 Programming example using the utility package
6
6 - 2
(1) Operating the utility package
(a) Initial setting (see Section 5.4.)
CH1, CH2 D/A conversion enable/disable setting .......... "Enable"
(b) Automatic refresh setting (see Section 5.5.)
CH1, CH2 Digital value ........ "D11, D12"
Error code ............................. "D13"
(c) Writing the intelligent function module parameters
(see Section 5.3.3)
Write the intelligent function module parameters to the CPU module.
This operation is performed using the parameter setting module selection
screen.
MELSEC-Q
6 - 2