Kenwood DMX809S Quick Start Manual page 90

Settings Settings
<Reset Android Auto Wireless Connection>
Reset the password of Android Auto wireless
connection. For details, see page 11.
<Beep>
This setting is available only when 2-way speaker
system is selected (page 43).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
• Available only when <SETUP Memory> is set to
[Unlock] (selected initially).
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
You can also set to lock the <SETUP Memory> from
being changed. Touch [Lock] to lock the settings.
• Some items in <Setup> menu, eg. <Speaker/
X'over>, cannot be adjusted when [Lock] is
selected.
<Wireless/HDMI SETUP>
Selection for wireless Apple CarPlay/Android Auto or
HDMI device.
• HDMI: Select this to use the connected HDMI device.
Wireless connected Apple CarPlay and Android Auto
will be disconnected.
• Wi-Fi (initial): Select this to use wireless Apple
CarPlay/Android Auto. The system of this unit is
rebooted after touching [OK].
<OEM Setup>
Get information, and change the settings for using the
ADS adapter.
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings.
• After initializing the settings, adjust the settings on
the <Initial Setup> screen.
<Serial Number>
Displays the serial number.
<System Information>
Update the system by connecting a USB device
containing an update file.
• To obtain the update file, visit
<https://www.kenwood.com/cs/ce/>.
Connect a USB device with the update file to the unit.
System Information
Application Version Vxxx
Update
System Version Vxxx Update
GNSS Version Vxxx
Update
HD Radio Version Vxxx
Update
Update starts. It may take a while. If the update has
been completed successfully, "Update Completed.
Please Ignition OFF" appears.
<Application Version>
Updates the system application.
<System Version>
Updates the system.
<GNSS Version>
Updates the Global Navigation Satellite firmware.
<HD Radio Version> (Only for DMX809S)
Updates the HD Radio firmware.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the ignition switch off
then on, and retry the update.
<Open Source Licenses>
Shows the Open Source Licenses.
ENGLISH 51