Kenwood DMX809S Quick Start Manual page 88

Settings Settings
<Front Camera Interruption>
When you shift the gear from the reverse position (R)
to another position, the view screen changes to the
front view screen automatically and remains for the
preset period of time.
• Selectable when <Front Camera> and <Rear
Camera Interruption> are set to [ON].
• 5 Sec/10 Sec/15 Sec/20 Sec.
• OFF (Initial): Not used.
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF: Select this when no rear view camera is
connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the mark (1), and then adjust the position of
the selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Reverse with ATT>
• ON (Initial): The sound is attenuated while the gear is
shifted to the reverse (R) position.
• OFF: Not used.
<Parking Assist>
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the sensor
detects obstacles.
• OFF: Cancels.
<Parking Assist Position>
Select where information about obstacles is displayed
on the screen.
• Left/Right (Initial)
<AV Input>
Select the usage of the AV-IN input terminal
(adjustable only in Standby Mode (page 4)).
• AV-IN (Initial): Select this when an external AV device
is connected.
To watch the connected device, select [AV-IN] on
the source/option selection screen.
• Camera: Select this to watch the view from the
connected camera.
To watch the camera view, select [Camera] on the
source/option selection screen.
ENGLISH 49