Date And Clock Settings - Kenwood DMX809S Quick Start Manual

Component Names and Basic Operations Component Names and Basic Operations
<Rear Camera>
Make the settings to display the picture from the
connected rear view camera.
<User Customize>
Change the display design.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• Under 0° (Initial)/5°/10°/15°/20°

Date and clock settings

1
Display the Home screen.
2
Display the <Setup> screen.
From the Home screen (page 4), touch as
follows:
3
Display the <System> screen (
then enter the item-setting screen you
want to change ( 2 ).
ENGLISH
6
Setup
Language
Audio
Display Clock
Time Format
Input
Time Zone
System
Clock Adjust
Eg. When selecting <Clock>
4
Set or adjust the date and clock items.
<Clock>*
Select the method to set the date and clock.
• GPS-SYNC (Initial): Synchronizes the clock time
with GPS.
• Manual: Sets the clock manually using <Clock
Adjust>. See the following.
<Time Format>
Select the time display format.
• [12-Hour] (Initial)/[24-Hour]
<Time Zone>
Select the time zone for your residential area.
• Pacific Time (Initial)/Central Time/Mountain
Time/Eastern Time, etc.
1 ), and
<Clock Adjust>
Touch [
English
date), and adjust the hour/minute. Touch [SET] (2)
Enter
to finish setting the clock.
Enter
Enter
Enter
<Daylight Saving Time>
(Not used when the clock is set manually)
Activate this by selecting the additional time for
Daylight Saving Time (if available in your residential
area).
• OFF (Initial)/30min/1Hr
* You can also display the <Clock> screen by touching the clock
area if shown on the Home screen.
] (1) to adjust the date (year/month/
J ]/[ K
Clock Adjust
Year Month Date Hour Minute
2022 / 1 / 1 AM4 : 1
SET