System Settings - Kenwood DMX809S Quick Start Manual

Settings Settings

System settings

1
Display the <System> screen.
On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[System] (1) → [Enter] for the item you adjust or
the appropriate setting for the item (2).
Setup
Audio Language
English
Clock
Display Enter
Time Format
Input Enter
System Time Zone
Enter
Clock Adjust
Enter
2
Adjust the item if more steps are required.
See the respective explanation that follows.
<Language>
Select the text language used for on-screen
information. For details, see page 4.
"Please Ignition OFF" appears when the setting is
changed. Turn the ignition switch off then on to
enable the change.
<Clock>
Set the date and clock adjustment method. For details,
see page 5.
50 ENGLISH
<Time Format>
Select the time display format—either [12-Hour]
(Initial) or [24-Hour].
<Time Zone>
Select the time zone for your residential area. For
details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see
page 5.
<Daylight Saving Time>
(Not used when the clock is set manually)
Activate this by selecting the additional time for
Daylight Saving Time (if available in your residential
area). For details, see page 5.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices.
For details, see page 9.
<PIN Code>
Shows the current PIN code for this unit.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Device Name>
Shows the device name of this unit—DMX809S or
DMX8709S.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Touch and hold [Enter] to reset all settings you
have made for using Bluetooth mobile phones and
Bluetooth audio players.
<TEL SETUP>
Configure settings for using Bluetooth mobile phones.
For details, see page 39.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password
of this unit.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
<Driving Position>
Set your driver's seat position of your car — [LEFT]
(initial) or [RIGHT].
This setting changes the sidebar/button position of
Apple CarPlay/Android Auto screens accordingly with
the driver seat position.
• This setting is available only when iPhone with Apple
CarPlay and Android device with Android Auto are
not connected.
<Android Mode Select>
Select your Android usage — either [Android Auto]
(initial) or [Mirroring for Android].
• This setting is available only in Standby Mode with
no device connected via USB.