Radio (For Dmx8709S); Presetting Stations In The Memory - Kenwood DMX809S Quick Start Manual

Radio (for DMX8709S)

Radio (for DMX8709S)
2 Station information area
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [Radio Text] switches between [Radio
Text], [Radio Text Plus] and [PTY].
3 Current station frequency
4 Displays the preset stations window (page 27)
• To hide the window, touch [ > ].
5 [P1] – [P5]
• (Touch) Selects a preset station.
• (Hold) Presets the current station.
6 Displays/hides the following operation keys
[AME ] (Hold) Preset the stations
automatically.
[MONO] (For FM stations) Activates monaural
mode for better FM reception (stereo
effect will be lost). The MONO indicator
lights up.
• To deactivate, touch [MONO] again.
[TI] (For FM RBDS stations)
Activates TI Standby Reception mode.
• When TI is activated, the unit is ready
to switch to Traffic Information if
available. The TI indicator lights up
in white.
• If the TI indicator lights up in orange,
tune in to another station providing
Radio Broadcast Data System signals.
• The volume adjustment made for
Traffic Information is automatically
memorized and used.
• To deactivate, touch [TI] again.
26 ENGLISH
7 Indicators
• TI: Lights up in white when receiving the traffic
information, and lights in orange when TI
Standby Reception is on standby.
• ST: Lights up when receiving a stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
• AUTO1/AUTO2/MANU: Seek mode indicator
8 Operation keys
Displays the <Equalizer> screen
[ ]
(page 42).
[PTY] (For FM RBDS stations)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to
search for.
If there is a station broadcasting a
program of the same PTY code as
you have selected, that station is
tuned in.
[SEEK] Selects the seek mode for [
[ T ].
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations
one after another
• MANU: Manual search
[ S ]/[ T ] Searches for a station.
• The search method differs
according to the selected setting
for [SEEK] (see above).

Presetting stations in the memory

You can preset five stations each for AM and FM1/
FM2/FM3.
Automatic presetting — AME (Auto
Memory)
1
Select the band
On the source control screen:
FM1
2
Start AME.
The local stations with the strongest signals are found
and stored automatically.
S ]/
FM3
(Hold)