Connections Setting - Kenwood DMX809S Quick Start Manual

In-Car Connections In-Car Connections

Connections setting

You can change various settings for the connected
devices.
1
Display the <
Connections SETUP
From the Home screen (page 3), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, you can
change and confirm the following item settings.
• For list/setting screen operations, see also
page 14.
Connections SETUP
Device List
Enter
PIN Code
0000
Device Name
(Model name)
Bluetooth Device Address
00:00:00:00:00:00:00
Initialize
Enter
TEL SETUP
Enter
Connections SETUP
Wi-Fi Setup Enter
Device Audio Control
Enter
Driving Position
Left Right
Android Mode Select
Enter
Enter
Reset Android Auto Wireless Connection
<Device List>
Devices connected for Apple CarPlay, Android
Auto, USB Mirroring, Bluetooth phone, and
Bluetooth audio are listed. You can check their
names and their status on the list (page 10).
> screen.
<PIN Code>
• To change the PIN code, enter a new PIN code
and touch [Enter] to finish.
• To correct the PIN code input, touch and hold
[Clear], and re-enter the PIN code.
• This setting is available only when iPhone with
Apple CarPlay is not connected.
<Device Name>
Shows the device name of this unit to be shown
on the Bluetooth device —
DMX8709S
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Initialize the Bluetooth settings (page 50).
<TEL SETUP>
See step 2 on page 40.
• This setting is available only when iPhone with
Apple CarPlay is not connected.
DMX809S or
.
<Wi-Fi Setup>
Shows the device name, device address and
password of this unit.
<Device Audio Control>
Go to step 2 on page 12.
<Driving Position>
Set your driver's seat position of your car — [LEFT]
(initial) or [RIGHT].
This setting changes the sidebar/button position
of Apple CarPlay/Android Auto screens accordingly
with the driver seat position.
• This setting is available only when iPhone with
Apple CarPlay and Android device with Android
Auto are not connected.
<Android Mode Select>
Select Android device usage for Apps — either
[Android Auto] (initial) (page 16) or [Mirroring
for Android] (page 17).
• This setting is available only in Standby Mode
with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset Android Auto wireless connection when
you want to change the password for wireless
connection manually. The system of this unit is
rebooted after touching [Yes].
ENGLISH 11