Installing The Unit; Removing The Unit - Kenwood DMX809S Quick Start Manual

Installation and Connection Installation and Connection
6
Install the unit in your car.
Make sure that the unit is installed securely in place.
If the unit is unstable, it may malfunction (eg., the
sound may skip).
7
Reconnect the battery.
·
8
Initialize the unit.
9
Configure <Initial Setup> (page 5).

Installing the unit

Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
* Shape of your car brackets may differ.
Installing the unit using the mounting
sleeve
'
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
π / [
Installing the trim plate
Car bracket*

Removing the unit

1
Remove the trim plate (
two extraction keys (
\
]
2
When the lower level is removed, remove
from the upper two catches of the trim
plate (
The frame can be removed from the top side in the
same manner.
]
) by inserting the
\
) as illustrated.
]
]
).
ENGLISH
29