Bluetooth® Device; Bluetooth Mobile Phone - Kenwood DMX809S Quick Start Manual

Bluetooth® Device Bluetooth® Device
You can use the mobile phone and portable audio
player connected through Bluetooth.
• While using Apple CarPlay, Android Auto, or USB
Mirroring, use their features for hands-free phones
and audio playback. (The Bluetooth device currently
connected is disconnected when an iPhone with
Apple CarPlay or an Android device with Android
Auto is connected.)
Note
• While driving, do not perform complicated
operations such as dialing numbers, using the phone
book, etc. When you perform these operations, stop
your car in a safe place.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• Some Bluetooth devices may not be used with this
unit depending on the Bluetooth version of the
device.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
– Phone book
– Dialed calls, received calls, and missed calls (up to
100 entries in total)
• Two devices for Bluetooth mobile phone and one for
Bluetooth audio can be connected at a time.
However, when [Bluetooth Audio] is selected as the
source, you can connect up to five Bluetooth audio
devices and switch between these five devices.

Bluetooth mobile phone

When a call comes in, this unit automatically enters
[TEL], and when it ends, go back to the previous
source.
When a call comes in...
1 2
Device Name 1 Device Name 2
Incoming Call
Name
1234XXXXXX
1 Phone device information
• Either hands-free phone 1 or 2 is highlighted
to indicate which phone is ringing when a call
comes in.
Touching the operation keys performs the following
actions:
Answers a call.
[ ]
Rejects a call.
[ ]
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from any camera is displayed.
During a call...
1 2
Phone Name 1 Phone Name 2
Name
Talking...
1234XXXXXX
NR LEVEL – +1
–
EC LEVEL +1
– +1
MIC LEVEL
DTMF
Touching the operation keys performs the following
actions:
Ends a call.
[ ]
Switches between hands-free mode
[ ]/
and phone mode.
[ ]
Enters DTMF (Dual Tone Multi
[DTMF]
Frequency). You can send a text using
the keypad.
Adjusts the noise reduction level.
NR LEVEL
(–5 to 5)
[–] / [+]
Adjusts the echo volume level.
EC LEVEL
(–5 to 5)
[–] / [+]
Adjusts the volume level of the
MIC LEVEL
microphone. (–10 to 10)
[–] / [+]
• Press the VOL / buttons on the monitor panel to
J K
adjust the volume of the call or earpiece.
+
+
+
ENGLISH
23