Table of Contents
Advertisement
Installation and operation
4.1
Notes on installation
Read and observe all safety-relevant information
Before you install the transponder, read this document carefully to ensure trouble-free and
safe installation and commissioning.
Risk of serious injury due to incorrect installation, removal or commissioning
procedure
• Only qualified personnel are permitted to perform installation, removal and
• When defining the drill holes, you must provide sufficient minimum spacing between the
• Use only suitable tools when handling the transponder.
• Ensure that the components are in perfect condition before installation.
The transponder can only be used in conjunction with the RTLS localization system. The radio
address of the transponder can be obtained from the data matrix code printed on the
transponder.
Install the transponder such that it has a direct line-of-sight connection to the gateways (360°
panorama view). Any type of material can impact wireless localization. Wireless localization
through metal is not possible. In this case, localization via wireless reflections can occur,
which results in inaccurate determination of the location.
Check the transponder for damage before installation. The specified operating temperature
ranges must be observed.
SIMATIC RTLS4030T EX1
Operating Instructions, 12/2022, C79000-G8976-C677-01
WARNING
WARNING
commissioning work.
individual drill holes and between the drill holes and the housing wall so that the
transponder withstands an impact test.
4
17
Advertisement
Table of Contents
