Siemens SIMATIC RTLS4030T EX1 Operating Instructions Manual page 10

Safety information
Indoor use
The transponder is suitable for indoor use only.
Danger due to damaged parts
If you use damaged parts, there is no guarantee that the transponder will function
according to the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of approvals
• Violation of EMC regulations
• Damage to the transponder and other components
• Use only undamaged parts.
Risk of serious injury due to incorrect installation, removal or commissioning
procedure
• Only qualified personnel are permitted to perform installation, removal and
• When defining the drill holes, you must provide sufficient minimum spacing between the
• Use only suitable tools when handling the transponder.
• Ensure that the components are in perfect condition before installation.
Risk of serious injuries
• Only change the batteries outside of hazardous areas or in the absence of explosive
• Do not transport batteries through hazardous areas.
• Use only approved battery types for operating the transponder.
• Operate the transponder in hazardous areas only with the battery holders.
• Improper handling of batteries can lead to fires and skin injuries.
10
WARNING
WARNING
WARNING
commissioning work.
individual drill holes and between the drill holes and the housing wall so that the
transponder withstands an impact test.
WARNING
atmospheres.
Operating Instructions, 12/2022, C79000-G8976-C677-01
SIMATIC RTLS4030T EX1