Table of Contents
Advertisement
Risk of serious injuries
• Repairs to explosion-protected equipment may only be carried out by authorized persons
• Repairs must be carried out in accordance with IEC 60079-19.
• All application settings must be re-entered. For this reason, you must perform a restart
• For applications in hazardous areas, only a device and an electronics module with
Risk of serious injury due to electrostatic charging
• Use only a moist cloth to clean the transponder.
• When selecting the right cleaning agent, pay attention to its suitability, since damage to
Damage due to incorrect transport or storage
• Transport and storage of the transponder is only permitted in its original packaging.
• The transponder must be stored in a dry place.
NOTICE
LABS (paint-wetting impairment substances)
When opening and working inside the transponder in LABS-restrictive areas, it is required for
hands, work tools and the cover to be cleaned to prevent contamination to and from the
interior of the transponder. Even if LABS have deliberately not been processed, minimal
residues cannot be ruled out.
SIMATIC RTLS4030T EX1
Operating Instructions, 12/2022, C79000-G8976-C677-01
WARNING
with original replacement parts and in accordance with the state of the art. The
applicable provisions for this must be complied with.
after a repair.
corresponding Ex approval is permitted to be used. Order replacement parts from your
authorized representative. You will find the serial number on the nameplate of the
device located inside the device.
WARNING
seals and connections may occur otherwise. Flammable products are generally not
permitted.
WARNING
Safety information
11
Advertisement
Table of Contents
