Table of Contents
Advertisement
Appendix
A.10 Transparency software
A.10.2
Installation and operation
Installation and setup of the Transparency software
To install and commission the application, proceed as follows:
1. Download the Transparency software version 1.0 (https://transparenz.software/) to your
computer.
2. Extract this file into any folder.
3. Make sure the JAVA framework is installed in an up-to-date version.
4. Open the Transparency software by double-clicking.
The Transparency software supports the following signature processes
be.com/en/development-resources/transparenzsoftware/dateiformat-datensatz/):
• OCMF version 0.2
• EDL40 E-Mobility Extension (EMH Metering)
• EDL40 E-Mobility Extension Sig. (ebee smart technologies)
• Data format of Alfen B.V.
Notes on operating the Transparency software
1. Open the installed application.
2. Select the tab "Datei - Öffnen".
3. Select the previously loaded measured value file (*.xml) with Öffnen.
4. File and signature formats will be detected automatically.
140
(https://has-to-
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Advertisement
Table of Contents
