Kyocera ECOSYS PA6000 Series Operation Manual page 179

Setup and Registration (System Menu) > Operation Method
Wired Netwk. Set
[Menu] key > [ ] [ ] key > [Network] > [OK] key > [ ] [ ] key > [Wired Netwk. Set] > [OK] key
Configure wired network settings.
Item
TCP/IP Settings
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
ProtocolSettings
[Menu] key > [ ] [ ] key > [Network] > [OK] key > [ ] [ ] key > [ProtocolSettings] > [OK] key
Configure protocol settings.
Item
Bonjour
Off/On
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
IP Filter (IPv4)
Off/On
IP Filter (IPv6)
Off/On
IPSec
Off/On
For details on setting value.
TCP/IP Settings (page 8-18)
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
-
Select whether to use Bonjour.
Value: Off, On
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
-
Select whether to communicate using IP Filter (IPv4).
Value: Off, On
-
Select whether to communicate using IP Filter (IPv6).
Value: Off, On
-
Select whether to use IPSec.
Value: Off, On
8-20
Description
Description
*1
*1
*1
*1