User/Job Account; Application - Kyocera ECOSYS PA6000 Series Operation Manual

Setup and Registration (System Menu) > Operation Method
Allowlisting
[Menu] key > [ ] [ ] key > [Security] > [OK] key > [ ] [ ] key > [Allowlisting] > [OK] key
Item
Allowlisting

User/Job Account

[Menu] key > [ ] [ ] key > [User/Job Account] > [OK] key
Configure settings related to machine management.
Overview of User Login Administration (page 9-2)
Overview of Job Accounting (page 9-18)
Unknown User Settings (page 9-30)

Application

[Menu] key > [ ] [ ] key > [Application] > [OK] key
Configure the application settings.
Optional Function (page 11-8)
Checking Details of Application (page 11-9)
In case if the unauthorized program or the program that has tampered are installed, the
stored data or the contents of the communication in this program might be stolen.
Once this function is activated, execution of the unauthorized software or the tampering
of the software can be prevented, and possible to maintain the reliability of the system.
Value: Off, On
NOTE
• After setting to [On], it is necessary to turn the power off and on.
• Once this function is activated, the start up of this product will be slowered.
• If malware is detected, an event report can be used as a way to understand its
content. Event reports are available if the Command Center RX "Management
Settings: Notification/Report" [Recipient 1 (to 3) e-mail address is designated] and
[Notify when Malicious Program is Detected] is set to [On].
8-43
Description