Kyocera ECOSYS PA6000 Series Operation Manual page 193

Setup and Registration (System Menu) > Operation Method
Item
WrongSize Loaded
MP Tray Empty
Timer Setting
[Menu] key > [ ] [ ] key > [Device Common] > [OK] key > [ ] [ ] key > [Timer Setting] > [OK] key
Configure settings related to the time.
Item
Auto Panel Reset
PanelReset Timer
Sleep Level Set.
Sleep Level (models
except for Europe)
Status
Sleep Timer
Set what to do when it is detected that the cassette paper size setting does not match the
actual paper size that is fed.
Value
Continue: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Turn this setting to [On] if you want the error displayed when the MP tray is configured as
the default paper source, and there is no paper in the MP tray, or turn it to [Off] not to
have the error displayed.
Value: Off, On
NOTE
This function is not displayed when the optional large capacity feeder is installed.
If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the "PanelReset Timer".
PanelReset Timer (page 8-34)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
-
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
NOTE
When the optional Network Interface Kit is installed, this is not displayed.
Set whether to use the Energy Saver mode for the following functions individually:
*1
• Card Reader
• Application
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Set amount of time before entering Sleep.
Value:
1 to 120 minutes (1 minute increments)
Sleep (page 2-26)
8-34
Description
Description