Table of Contents
Advertisement
Figure 57. 10 x 2.5-inch SAS4/SATA RAID w/ Rear 2 x 2.5-inch (w/ FPERC11)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 74. 10 x 2.5-inch SAS4/SATA RAID (w/ FPERC11)
Order
From
1
SIG_PWR_1 (system board power connector)
2
SL1 (signal connector on system board)
3
CTRL_SRC_SB1 (front PERC)
4
MB_SIG_PWR_0 (system board power connector)
To
BP_PWR_1 (backplane power connector)
CTRL_DST_PA1 (front PERC)
BP_DST_SB1 (backplane signal connector) &
R_BP_DST_SA1 (rear backplane)
R_BP_PWR_1 (rear backplane power connector)
Installing and removing system components
91
Advertisement
Table of Contents
