Table of Contents
Advertisement
Before you begin the installation or removal process, follow the
instructions.
Table 92. BOSS-N1 module kit components
R660 (quantity)
NA
1
1
1
1
1 or 2
1 or 2
2
2
1
1
To remove the BOSS blank :
1. Power off the system and
2. Using a Phillips #1 screwdriver, remove the screw that secures the BOSS-N1 module bay to the chassis.
3. Remove the blank from the BOSS-N1 module bay.
Figure 144. Removing the BOSS-N1 module blank
To install the BOSS blank:
1. Align the blank with the BOSS-N1 module bay and push it into the bay until it clicks into place.
176
Upgrade Kits
Components in kit
BOSS cover
M3 x 0.05 x 4.5 mm screws
BOSS signal cable
BOSS power cable
BOSS-N1 module
BOSS-N1 card carrier
M.2 SSD
M.2 480 GB information label
M.2 960 GB information label
BOSS card filler
Tech sheet
remove the system
cover.
Safety instructions
and
Before working inside your system
Advertisement
Table of Contents
