Table of Contents
Advertisement
Figure 52. 8 x 2.5-inch NVMe RAID (w/ FPERC12)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 69. 8 x 2.5-inch NVMe RAID (w/ FPERC12)
Order
From
1
SIG_PWR_1 (system board power connector)
2
SL1 (signal connector on system board)
3
CTRL_SRC_SA2 (front PERC)
4
CTRL_SRC_SB2 (front PERC)
5
CTRL_DST_PB1 (front PERC)
6
SL3 (signal connector on system board)
To
BP_PWR_1 (backplane power connector)
CTRL_DST_PA1 (front PERC)
BP_DST_PA1 & BP_DST_PB1 (backplane signal
connector)
BP_DST_PA2 & BP_DST_PB2 (backplane signal
connector)
BP_DST_SA1 (front PERC power connector)
CTRL_DST_PB1 (front PERC)
Installing and removing system components
87
Advertisement
Table of Contents
