Connecting External Devices; Connecting An Onkyo Stereo Cassette Tape Deck - Onkyo DR-UN7 Instruction Manual

Connecting External Devices

Connect the white plugs of the audio cables to the L jacks and connect the red plugs of the audio cables to the R jacks.
Tip: The source names appearing in the display can be customized for the connected component (see page 28).

Connecting an Onkyo Stereo Cassette Tape Deck

The following diagram illustrates how to connect an optional Onkyo stereo cassette tape deck.
Connect the DVD receiver's TAPE/HDD OUT jacks to the tape deck's INPUT (REC) jacks, and the DVD receiver's
TAPE/HDD IN jacks to the tape deck's OUTPUT (PLAY) jacks.
DVD receiver's rear panel
: Signal flow
What does connecting an Onkyo stereo cassette tape deck using an
• You can control a connected Onkyo stereo cassette tape deck using the supplied remote controller. You also need to
connect the RCA/phono audio cable.
• To operate the system, the source name in the display should be TAPE. (Since the default source name in the
display is TAPE, you do not need to change the setting. See page 28 for further information.)
• When the connected Onkyo stereo cassette tape deck plays back, the Input Selector on the DVD receiver is automat-
ically switched to TAPE.
Connecting an RI Dock (Remote Interactive Dock)
The following diagram illustrates how to connect the Onkyo DS-A1 which is sold separately.
Connect the TAPE/HDD IN jacks on the DVD receiver to the AUDIO OUT jacks on the RI Dock.
DVD receiver's rear panel
: Signal flow
The jack connection enables you to use the following functions:
• You can control a connected Onkyo RI Dock using the supplied remote controller. You also need to connect the RCA/
phono audio cable.
• When a RI Dock and other
the terminals between the two external devices.
• You need to change the source name in the display to HDD. (The default source name in the display is TAPE. See
page 28 for further information.) If the HDD device has a MODE switch, you must set the switch to HDD.
• When the connected Onkyo RI Dock plays back, the input selector on the DVD receiver is automatically switched to HDD.
red
white
RCA/phono audio cable
white
cable supplied
red
with the Onkyo stereo
cassette tape deck
Use either socket
RCA/phono audio cable
red
white
-compatible devices are connected with the DVD receiver, you must also interconnect
white
cable enable you to do?
white
red
S VIDEO OUT
Jacks on the RI Dock's rear
panel
cable
Onkyo stereo cassette
tape deck rear panel
INPUT OUTPUT
REMOTE
(REC) (PLAY)
CONTROL
L
R
red red white
AUDIO OUT DC IN
21