Initial Settings Menu; Using The Initial Settings Menu; Video Output Settings - Onkyo DR-UN7 Instruction Manual

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and video out-
put settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
ENTER

Video Output settings

Setting
TV Screen
(See also "Screen sizes
and disc formats" on
page 75.)
Component Out
Note:
If visual image becomes invisible after you have set "Progressive" for "Component Out", it is likely that the connected
TV does not support the progressive output. In this case, perform the following steps to return the setting to "Interlace":
1
Stop DVD playback.
2
Press EDIT/NO/CLEAR.
3
Rotate MULTI JOG to select "Interlace?".
4
Press MULTI JOG.
You will see the message "Waiting". Then wait for a moment until the initial display appears. The video output changes
over to "Interlace".
70
DVD SETUP
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Progressive
Interlace
1
Press DVD SETUP and select "Ini-
tial Settings".
2 Use the cursor buttons and
ENTER to select the setting and
option you want to set.
All the settings and options are explained
on the following pages.
Notes:
• In the following table, the default setting is shown in
bold: other settings are shown in italics.
• Check the operating instructions supplied with your
other equipment to see which digital audio formats it's
compatible with.
• Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
Set if you have a widescreen TV.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details).
Note that progressive scan video is only output from the com-
ponent video jacks.
Set if your TV is not compatible with progressive scan video.